SROS Command Line Interface Reference Guide
clear host [ * | <hostname> ]
Use the clear host command to clear a hostname (and associated address) from the DNS host-to-address
table.
Syntax Description
*
<hostname>
Default Values
No default value necessary for this command.
Usage Examples
The following example clears all hostnames:
ProCurve>enable
ProCurve#clear host *
5991-2114
Clears all hosts from the host table.
Clears a specific host entry from the host-to-address table.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
36