HP ProCurve 7102dl Reference Manual page 206

SROS Command Line Interface Reference Guide
Usage Examples
The following are output variations of the show ip bgp neighbors command:
ProCurve>enable
ProCurve#show ip bgp neighbors
BGP neighbor is 10.15.43.17, remote AS 100, external link
Configured hold time is 180, keepalive interval is 60 seconds
Default minimum time between advertisement runs is 30 seconds
Connections established 6; dropped 5
Last reset: Interface went down
Connection ID: 15
BGP version 4, remote router ID 8.1.1.1
BGP state is Established, for 01:55:05
Negotiated hold time is 180, keepalive interval is 60 seconds
Message statistics:
InQ depth is 0, OutQ depth is 0
Local host: 10.15.43.18, Local port: 179
Opens:
Notifications:
Updates:
Keepalives:
Unknown:
Total:
Foreign host: 10.15.43.17, foreign port: 1048
Flags: passive open
ProCurve#show ip bgp neighbors 10.15.43.34 advertised-routes
BGP local router ID is 10.0.0.1, local AS is 101.
Status codes: * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network NextHop
*> 1.0.0.0/8 10.15.43.17
*> 2.0.0.0/9 10.15.43.17
5991-2114
Sent Rcvd
1 1
0 0
0 8
116 116
0 0
117 125
Metric Path
1 100 i
1 100 i
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
204