SROS Command Line Interface Reference Guide
clear ip ospf [process | redistribution]
Use the clear ip ospf command to reset open shortest path first (OSPF) information.
Syntax Description
process
redistribution
Default Values
No default value necessary for this command.
Usage Examples
The following example resets the OSPF process:
ProCurve>enable
ProCurve#clear ip ospf process
5991-2114
Restarts the OSPF process.
Refreshes routes redistributed over OSPF.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
41