HP ProCurve 7102dl Reference Manual page 118

SROS Command Line Interface Reference Guide
debug ip pim-sparse assert [event | state] <address>
Use the debug ip pim-sparse assert command to display debug messages associated with
protocol-independent multicast (PIM) sparse assert transactions. Debug messages are displayed (real-time)
to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
event
state
<address>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all PIM sparse assert event messages:
ProCurve>enable
ProCurve#debug ip pim-sparse assert event
5991-2114
Displays PIM sparse assert events.
Displays PIM sparse assert state changes.
Specifies group address to filter.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
116