HP ProCurve 7102dl Reference Manual page 100

SROS Command Line Interface Reference Guide
debug interface <interface>
Use the debug interface command to activate debug messages associated with the specified interface.
Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
< interface >
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug interface command activates debug messages to aid in the troubleshooting of physical
interfaces.
Usage Examples
The following example activates all possible debug messages associated with the Ethernet port:
ProCurve>enable
ProCurve#debug interface ethernet
5991-2114
Activates debug messages for the specified interface. Type debug interface ? for
a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
98