HP ProCurve 7102dl Reference Manual page 378

SROS Command Line Interface Reference Guide
5991-2114
<port number>
<port name>
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
specified range.
Specifies the port number used by TCP or UDP to
pass information to upper layers using the following
syntax: <0-65535>. All ports below 1024 are considered
well-known ports and are controlled by the Internet
Assigned Numbers Authority (IANA). All ports above
1024 are dynamically assigned ports that include
registered ports for vendor-specific applications.
The following UDP port numbers can be specified using
the associated names:
biff (Port 512)
bootpc (Port 68)
bootps(Port 67)
discard (Port 9)
dnsix (Port 195)
domain (Port 53)
echo (Port 7)
isakmp (Port 500)
mobile-ip (Port 434)
nameserver (Port 42)
netbios-dgm (Port 138)
netbios-ns (Port 137)
netbios-ss (Port 139)
The following TCP port numbers can be specified using
the associated names:
bgp (Port 179)
chargen (Port 19)
cmd (Port 514)
daytime (Port 13)
discard (Port 9)
domain (Port 53)
echo (Port 7)
exec (Port 512)
finger (Port 79)
ftp (Port 21)
gopher (Port 70)
hostname (Port 101)
ident (Port 113)
irc (Port 194)
klogin (Port 543)
kshell (Port 544)
login (Port 513)
ntp (Port 123)
pim-auto-rp (Port 496)
rip (Port 520)
snmp (Port 161)
snmptrap (Port 162)
sunrpc (Port 111)
syslog (Port 514)
tacacs (Port 49)
talk (Port 517)
tftp (Port 69)
time (Port 37)
who (Port 513)
xdmcp (Port 177)
lpd (Port 515)
nntp (Port 119)
pim-auto-rp (Port 496)
pop2 (Port 109)
pop3 (Port 110)
smtp (Port 25)
sunrpc (Port 111)
syslog (Port 514)
tacacs (Port 49)
talk (Port 517)
tftp (Port 69)
telnet (Port 23)
time (Port 37)
uucp (Port 540)
whois (Port 43)
www (Port 80)
376