SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
isdn-group
Use the isdn-group command to enter the ISDN Group Configuration mode command set. Refer to the
section ISDN Group Config Command Set on page 1204 for more information on the commands available
for each group.
Syntax Description
No subcommands.
Default Values
No default values necessary for this command.
Functional Notes
An ISDN group allows the user to specify the maximum and minimum number of B-channels that can be
used for a specific type of call. It is a logical group of B-channels from one or more ISDN interfaces. An
ISDN interface can be a member of multiple ISDN groups which makes it possible to share its B-channels
between different types of calls.
Usage Examples
The following example uses the isdn-group command to enter the ISDN Group Configuration mode:
ProCurve(config)#isdn-group
ProCurve(config-isdn-group 1)#
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
461