HP ProCurve 7102dl Reference Manual page 254

SROS Command Line Interface Reference Guide
show modules
Use the show modules command to display a list of the modules currently installed in the system.
Syntax Description
No subcommands.
Default Value
No default value necessary for this command.
Usage Examples
The following is a sample output from the show modules command:
ProCurve>enable
ProCurve#show modules
Slot Port Type
1 1–2 E1/E1 WAN
2 1–2 E1/E1 WAN
3 1–8 Octal E1
4 - Empty
5991-2114
Part Number
J8456A
J8456A
J8463A
–
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Software Version
1
1
1
–
252