SROS Command Line Interface Reference Guide
debug ip policy
Use the debug ip policy command to display policy-based routing events. Debug messages are displayed
(real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates policy-based routing event messages:
ProCurve>enable
ProCurve#debug ip policy
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
121