HP ProCurve 7102dl Reference Manual page 889

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
frame-relay lmi-n393dte <counter>
Use the frame-relay lmi-n393dte command to set the N393 LMI monitored event counter for the DTE
endpoint. Typical applications should leave the default value for this counter. Use the no form of this
command to return to the default value.
Syntax Description
<counter> Sets the counter value (Range: 1 to 10).
Default Values
By default, the LMI monitored event counter for the DTE endpoint is set to four events.
Usage Examples
The following example sets the N393 threshold for five events:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay lmi-n393dte 5
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 887