HP ProCurve 7102dl Reference Manual page 731

SROS Command Line Interface Reference Guide
backup maximum-retry <attempts>
Use the backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state. For more
detailed information on backup functionality, refer to the Functional Notes section of the command
backup call-mode <role> on page 723.
Syntax Description
<attempts>
Default Values
By default, backup maximum-retry is set to 0 attempts.
Usage Examples
The following example configures the SROS to retry a dial-backup call four times before considering
backup operation unavailable:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#backup maximum-retry 4
5991-2114
Selects the number of call retries that will be made after a link failure (valid range
is 0 to 15). Setting this value to 0 will allow unlimited retries during the time the
network is failed.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
729