HP ProCurve 7102dl Reference Manual page 826

SROS Command Line Interface Reference Guide
connect-order [last-successful | round-robin | sequential]
Use the connect-order command to specify the starting point in the connection sequence for each
sequence activation. The connection sequence is a circular list. Use the no form of this command to restore
the default values.
Syntax Description
last-successful
round-robin
sequential
Default Values
By default, connect sequences are processed sequentially.
Usage Examples
The following example configures the connection sequence to begin with the last successful entry:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#connect-order last-successful
5991-2114
Specifies the connect sequence be processed beginning with the last successful
entry or the first entry if there are no previous connections.
Specifies the connect sequence be processed beginning with the entry that
follows the last successful entry or the first entry if there are no previous
connections.
Specifies the connect sequence be processed from the beginning of the list.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
824