HP ProCurve 7102dl Reference Manual page 164

SROS Command Line Interface Reference Guide
show backup interfaces
Use the show backup interfaces command to display all configured backup interfaces and the associated
parameters for each.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following example enters the Enable command mode and uses the show command to display backup
interface information:
ProCurve>enable
ProCurve#show backup interfaces
Backup interfaces...
fr 1.16 backup interface:
Backup state: idle
Backup protocol: PPP
Call mode: originate
Auto-backup: enabled
Auto-restore: enabled
Priority: 50
Backup delay: 10 seconds
Restore delay: 10 seconds
Connect timeout: 60 seconds
Redial retries: unlimited
Redial delay: 10 seconds
Backup enabled all day on the following days:
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
Backup phone number list:
Number Call Type min/max DS0s Backup I/F
5551212 analog
5991-2114
1/1 ppp 2
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
162