HP ProCurve 7102dl Reference Manual page 283

SROS Command Line Interface Reference Guide
show tacacs+ statistics
Use the show tacacs+ statistics command to display terminal access controller access control system
(TACACS+) client statistics.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output for the show tacacs+ statistics command:
ProCurve>enable
ProCurve#show tacacs+ statistics
Packets sent:
Invalid responses:
Timeouts:
Average delay:
Maximum delay:
Socket Opens:
Socket Closes:
Socket Aborts:
Socket Errors:
Socket Timeouts:
Socket Failed Connections:
Socket Packets Sent:
Socket Packets Received:
5991-2114
Authentication Authorization
0 0
0 0
0 0
0ms 0ms
0ms 0ms
0
0
0
0
0
0
0
0
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Accounting
0
0
0
0ms
0ms
281