HP ProCurve 7102dl Reference Manual page 480

SROS Command Line Interface Reference Guide
logging forwarding receiver-ip <ip address>
Use this logging forwarding receiver-ip command to specify the IP address of the syslog server to use
when logging events that match the criteria configured using the logging forwarding priority-level
command. Enter multiple logging forwarding receiver-ip commands to develop a list of syslog servers to
use. See logging forwarding priority-level [error | fatal | info | notice | warning] on page 477 for related
information. Use the no form of this command to remove a configured address.
Syntax Description
<ip address>
Default Values
By default, there are no configured syslog server addresses.
Usage Examples
The following example specifies a syslog server (with address 172.5.67.99) to use when logging
messages:
ProCurve(config)#logging forwarding receiver-ip 172.5.67.99
5991-2114
Specifies the IP address (in dotted decimal notation) of the syslog server to use
when logging messages.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
478