HP ProCurve 7102dl Reference Manual page 738

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set
backup shutdown
Use the backup shutdown command to deactivate all backup functionality in the unit. Backup
configuration parameters are kept intact, but the unit will not initiate (or respond) to backup sequences in
the event of a network outage. Use the no form of this command to reactivate the backup interface. For
more detailed information on backup functionality, refer to the Functional Notes section of the command
backup call-mode <role> on page 723.
Syntax Description
No subcommands.
Default Values
By default, all SROS backup interfaces are disabled.
Usage Examples
The following example deactivates the configured backup interface:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#backup shutdown
5991-2114 © Copyright 2006 Hewlett-Packard Development Company, L.P. 736