HP ProCurve 7102dl Reference Manual page 878

SROS Command Line Interface Reference Guide
username <username> password <password>
Configures the username and password of the peer to use for demand authentication.
Syntax Description
<username>
<password>
Default Values
By default, there is no established username and password.
Functional Notes
PAP uses this entry to check received information from the peer. CHAP uses this entry to check the
received peer hostname and a common password.
Usage Examples
The following example creates a username of PROCURVE with password ROUTER for the demand link
labeled 5:
(config)#interface demand 5
(config-demand 5)#username PROCURVE password ROUTER
5991-2114
Specifies a username by alphanumerical string up to 30 characters in length (the
username is case-sensitive).
Specifies a password by alphanumerical string up to 30 characters in length (the
password is case-sensitive).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
876