SROS Command Line Interface Reference Guide
debug dynamic-dns [verbose]
Use the debug dynamic-dns command to display debug messages associated with dynamic DNS. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates dynamic DNS debug messages:
ProCurve>enable
ProCurve#debug dynamic-dns verbose
5991-2114
Turns on verbose messaging.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
93