HP ProCurve 7102dl Reference Manual page 871

SROS Command Line Interface Reference Guide Demand Interface Configuration Command Set
ppp chap hostname <hostname>
Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.
Use the no form of this command to remove a configured hostname. For more information on PAP and
CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |
pap] on page 865.
Syntax Description
<hostname> Specifies a hostname using an alphanumeric string up to 80 characters in length.
Default Values
By default, there are no configured PPP CHAP hostnames.
Usage Examples
The following example specifies a PPP CHAP hostname of my_host:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#ppp chap hostname my_host
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 869