HP ProCurve 7102dl Reference Manual page 307

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Usage Examples

The following example creates a list called myList and sends the Telnet connection information to the

TACACS+ server when the connection terminates:

ProCurve(config)#aaa accounting connection myList stop-only group tacacs+

The following example creates a list called myList and sends the Telnet connection information to the

TACACS+ server when the connection is made and when the connection terminates:

ProCurve(config)#aaa accounting connection myList start-stop group tacacs+

To complete this command, Telnet must be applied to the lines. See Line (Telnet) Interface

Config Command Set on page 550 for more detailed instructions.

Global Configuration Mode Command Set

Chapters

Table of Contents