Show Ip Bgp Summary - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

show ip bgp summary

Use the show ip bgp summary command to display a summary of the BGP route table.
Syntax Description
summary
Default Values
No default value necessary for this command.
Functional Notes
Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries
that are deemed the best path to advertised route are marked with a caret (>).
Usage Examples
The following sample output of the show ip bgp summary command shows a summarized list of the
configured BGP neighbors as well as their status and statistics.
ProCurve#show ip bgp summary
BGP router identifier 192.168.3.1, local AS number 304
8 network entries, 5 paths, and 23 BGP path attribute entries
Neighbor V
10.22.131.1 4
10.22.131.9 4
10.22.132.9 4
10.22.134.1 4
10.22.134.10 4
10.22.134.26 4
10.22.134.34 4
5991-2114
Displays a summary of the status for all BGP.
AS MsgRcvd
302 95
302 97
303 200
304 166
304 174
304 172
304 164
© Copyright 2007 Hewlett-Packard Development Company, L.P.
MsgSent InQ OutQ
104 0 0
105 0 0
179 0 0
178 0 0
179 0 0
174 0 0
174 0 0
Enable Mode Command Set
Up/Down State/PfxRcd
01:30:06 9
01:30:07 21
02:43:09 21
02:43:15 3
02:43:24 7
02:41:43 10
02:41:40 4
208