HP ProCurve 7102dl Reference Manual page 159

SROS Command Line Interface Reference Guide
reload [cancel | in <delay>]
Use the reload command to preform a manual reload of the SROS.
Caution
Performing a reload disrupts data traffic.
Syntax Description
cancel
in
<delay>
Default Values
No default value necessary for this command.
Usage Examples
The following example reloads the SROS software in 3 hours and 27 minutes:
ProCurve>enable
ProCurve#reload in 03:27
The following example reloads the SROS software in 15 minutes:
ProCurve>enable
ProCurve#reload in 15
The following example terminates a pending reload command:
ProCurve>enable
ProCurve#reload cancel
5991-2114
Optional. Use the cancel keyword to deactivate a pending reload command.
Optional. Use the in keyword to specify a delay period the SROS will wait before
reloading.
Specifies the delay period in minutes (mmm) or hours and minutes (hh:mm).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
157