HP ProCurve 7102dl Reference Manual page 105

SROS Command Line Interface Reference Guide
debug ip dns-client
Use the debug ip dns-client command to activate debug messages associated with DNS (domain naming
system) client operation in the SROS. Debug messages are displayed (real-time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug ip dns-client command activates debug messages to provide information on DNS client
activity in the SROS. The IP DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS client activity:
ProCurve>enable
ProCurve#debug ip dns-client
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
103