HP ProCurve 7102dl Reference Manual page 34

SROS Command Line Interface Reference Guide
clear crypto ike sa [policy <policy priority> | remote-id <remote-id>]
Use the clear crypto ike sa command to clear existing IKE security associations (SAs), including active
ones. Use the policy and remote-id options to remove specific SAs.
Syntax Description
policy <policy priority>
remote-id <remote-id>
Default Values
No default value necessary for this command.
Usage Examples
The following example clears the entire database of IKE SAs (including the active associations):
ProCurve>enable
ProCurve#clear crypto ike sa
The following example clears IKE SAs associated with policy 101:
ProCurve>enable
ProCurve#clear crypto ike sa policy 101
The following example clears an IKE SA associated with remote-id procurve:
ProCurve>enable
ProCurve#clear crypto ike sa remote-id procurve
5991-2114
Removes all IKE SAs associated with the specified policy priority. The policy
priority is assigned using
Removes all IKE SAs associated with the specified IKE remote ID. A delete
payload is sent to the peers prior to deletion of the SA. This command is
preferred to the clear crypto ike sa [policy <policy priority> | remote-id
<remote-id>]
command when multiple unique SAs have been created on
the same IKE policy but the user wants to delete only the SA to a unique
peer.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
crypto ike
on page 344.
32