HP ProCurve 7102dl Reference Manual page 60

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

clear spanning-tree counters [interface <interface id>]

The clear spanning-tree counters command clears the following counts: BPDU transmit, BPDU receive,

and number of transitions to forwarding state.

Syntax Description

interface <interface id>

Default Values

No default value necessary for this command.

Usage Examples

The following example clears the spanning tree counters for Ethernet 0/1:

ProCurve>enable

ProCurve#clear spanning-tree counters interface eth 0/1

Optional. Specifies a single interface. Enter clear spanning-tree counters ? for

a complete list of applicable interfaces.

Enable Mode Command Set

Chapters

Table of Contents