HP ProCurve 7102dl Reference Manual page 435

SROS Command Line Interface Reference Guide
ip policy-timeout <protocol> <range> <port> <seconds>
Use multiple ip policy-timeout commands to customize timeout intervals for protocols (TCP UDP ICMP)
or specific services (by listing the particular port number). Use the no form of this command to return to
the default timeout values.
Syntax Description
<protocol>
<range>
<port>
5991-2114
Specifies the data protocol such as ICMP, TCP, UDP, AHP, GRE, or ESP.
Optional. Customizes timeout intervals for a range of TCP or UDP ports.
Service port to apply the timeout value to; valid only for specifying TCP and UDP
services (not allowed for ICMP).
The following is the list of UDP port numbers that may be identified using the text
name (in bold):
all-ports
biff (Port 512)
bootpc (Port 68)
bootps(Port 67)
discard (Port 9)
dnsix (Port 195)
domain (Port 53)
echo (Port 7)
isakmp (Port 500)
mobile-ip (Port 434)
nameserver (Port 42)
netbios-dgm (Port 138)
netbios-ns (Port 137)
netbios-ss (Port 139)
The following is the list of TCP port numbers that may be identified using the text
name (in bold):
all_ports
bgp (Port 179)
chargen (Port 19)
cmd (Port 514)
daytime (Port 13)
discard (Port 9)
domain (Port 53)
echo (Port 7)
exec (Port 512)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
ntp (Port 123)
pim-auto-rp (496)
rip (Port 520)
snmp (Port 161)
snmptrap (Port 162)
sunrpc (Port 111)
syslog (Port 514)
tacacs (Port 49)
talk (Port 517)
tftp (Port 69)
time (Port 37)
who (Port 513)
xdmcp (Port 177)
login (Port 513)
lpd (Port 515)
nntp (Port 119)
pim-auto-rp (Port 496)
pop2 (Port 109)
pop3 (Port 110)
smtp (Port 25)
sunrpc (Port 111)
syslog (Port 514)
433