HP ProCurve 7102dl Reference Manual page 163

SROS Command Line Interface Reference Guide
show autosynch-status
Use the show autosynch-status command to display the current autosynch configuration and the statistics
for the SROS.BIZ and startup-config files (if autosynch is enabled).
Syntax Description
No subcommands.
Default Value
No default is necessary for this command.
Usage Examples
The following is a sample output from the show autosynch-status command (with AutoSynch
disabled):
ProCurve>enable
ProCurve#show autosynch-status
AutoSynch: Mode - Disabled
AutoSynch: SROS.BIZ not synched
AutoSynch: startup-config not synched
The following is a sample output from the show autosynch-status command (with AutoSynch
enabled):
ProCurve>enable
ProCurve#show autosynch-status
AutoSynch: Mode - Enabled
AutoSynch: SROS.BIZ synched
AutoSynch: startup-config synched
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
TM
TM
161