HP ProCurve 7102dl Reference Manual page 50

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Enable Mode Command Set

clear lldp counters

Use the clear lldp counters command to reset all LLDP packet counters to 0 on all interfaces.

Syntax Description

No subcommands.

Default Values

There are no default settings for this command.

Usage Examples

The following example resets all LLDP counters:

ProCurve>enable

ProCurve#clear lldp counters

Chapters

Table of Contents