HP ProCurve 7102dl Reference Manual page 382

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
The following commands are contained in the access-list standard:
remark
Use the remark command to associate a descriptive tag (up to 80 alphanumeric characters encased in
quotation marks) to the access-list. Enter a functional description for the list such as "This list blocks all
outbound web traffic".
log
use the log keyword to log a message (if debug access-list is enabled for this access list) when the access
list finds a packet match.
Usage Examples
The following example creates an access list UnTrusted to deny all packets from the 192.168.22.248/30
network:
ProCurve(config)#ip access-list standard UnTrusted
ProCurve(config-std-nacl)#deny 192.168.22.248 0.0.0.3
For more details, refer to the ProCurve Secure Router 7000dl Series Management and Configuration
Guide for information regarding access-list confutation.
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 380