HP ProCurve 7102dl Reference Manual page 876

SROS Command Line Interface Reference Guide
resource pool <pool name>
Use the resource pool command to associate a resource pool with the demand interface. No more than one
resource pool may be associated with an interface. Refer to resource pool-member <pool-name> [<cost>]
on page 1211 for more information. Use the no form of this command to restore the default values.
Syntax Description
<pool name>
Default Values
By default, no resource pool is associated with this interface.
Usage Examples
The following example associates the resource pool named Pool1 with demand interface 1:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#resource pool Pool1
5991-2114
Specifies the resource pool that this interface will use to originate/answer demand
connections.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
874