HP ProCurve 7102dl Reference Manual page 129

SROS Command Line Interface Reference Guide
debug ip urlfilter
Use the debug ip urlfilter command to display a summary of debug information for all URL filters being
used. Debug messages are displayed (real time) to the terminal (or Telnet) screen. The verbose option
gives more detailed information. Use the no form of this command to disable debug messages. Variations
of this command include:
debug ip urlfilter
debug ip urlfilter verbose
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages are disabled.
Usage Examples
The following example shows the debug summary for all URL filters being used:
ProCurve>enable
ProCurve#debug ip urlfilter
2005.11.06 05:31:52 Connected to a Websense server
2005.11.06 05:33:26 Allowed http://www.procurve.com/
5991-2114
Optional. Enables detailed debug messages.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
127