HP ProCurve 7102dl Reference Manual page 251

Secure router sros command line interface
Table of Contents

Advertisement

SROS Command Line Interface Reference Guide
show lldp neighbors [interface <interface type> <interface>] [detail |
realtime]
Use the show lldp neighbors interface command to display information about neighbors of this device
learned about via LLDP.
Syntax Description
interface <interface type>
<interface>
detail
realtime
Default Values
No default values necessary for this command.
Functional Notes
Use the realtime argument for this command to display full-screen output in real-time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit reatime
mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the information
will truncate at the bottom of the screen. In order to maximize the amount of data displayed, increase the
terminal length (using the terminal length command; refer to
Usage Examples
The following example shows detailed information about a device's neighbors:
ProCurve#show lldp neighbors interface eth 0/2 detail
Chassis ID: 00:12:79:02:DD:2A (MAC Address)
System Name: Router
Device Port: eth 0/1 (Locally Assigned)
Holdtime: 38
Platform: 3305
Software: Version: 08.00.22.sw1.D, Date: Mon Nov 01 10:28:55 2004
Capabilities: Bridge, Router
Enabled Capabilities: Router
Local Port: eth 0/2
Management Addresses:
Address Type: IP version 4, Address: 10.23.10.10
Interface Type: Interface Index, Interface Id: 2
5991-2114
Displays a summary of all neighbors learned about through interfaces of the
specified type (e.g., eth).
Displays a summary of all neighbors learned about through a specified
interface (e.g., eth 0/1). Type show lldp neighbors interface ? for a
complete list of applicable interfaces.
Optional. Shows detailed neighbor information for the specified interface or
interface type.
Displays full-screen output in real-time. Refer to the Functional Notes below
for more information.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
terminal length <lines>
on page 294).
249

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure router 7203dl j8753a j8753a

Table of Contents