HP ProCurve 7102dl Reference Manual page 364

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
hostname <name>
Creates a name used to identify the unit. This alphanumeric string should be used as a unique description
for the unit. This string will be displayed in all prompts.
Syntax Description
<name> Identifies the unit by alphanumeric string of up to 32 characters.
Default Values
By default, the hostname is ProCurveSRXXXXdl (where XXXX is the model number of the router). For
example, the default for the ProCurve Secure Router 7203dl is ProCurveSR7203dl.
Usage Examples
The following example creates a hostname for the SROS device of HP_RTR to identify the system as the
HP router:
ProCurve(config)#hostname HP_RTR
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 362