HP ProCurve 7102dl Reference Manual page 272

SROS Command Line Interface Reference Guide
show sip [name-service name-table | resources | statistics |
user-registration]
Use the show sip command to display Session Initiation Protocol (SIP) statistical and registration
information.
Syntax Description
name-service name-table
resources
statistics
user-registration
Default Values
No default necessary for this command.
Usage Examples
The following example shows sample output from the show sip statistics command:
ProCurve>enable
ProCurve#show sip statistics
Invites transmitted: 36
Invites received: 26
Invite Retransmits transmitted: 11
Invite Retransmits received: 0
Non-Invites transmitted: 1869
Non-Invites received: 1911
Non-Invite Retransmits transmitted: 12
Non-Invite Retransmits received: 41
Responses transmitted: 1982
Responses received: 3535
Response Restransmits transmitted: 45
Response Restransmits received: 0
5991-2114
Displays SIP name service information in the name table.
Displays SIP server resource information.
Displays SIP server statistic information.
Displays local SIP server registration information.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
270