SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
ip local policy route-map <map-name>
Use this command to specify a route-map for local policy routing on the device. This setting is applied to
the local network interface. Use the no form of this command to return to the default route-map.
Syntax Description
<map-name>
Specify the name of the route-map.
Default Values
By default, this command is disabled.
Functional Notes
Before a route map can be specified, it must first be defined using the route-map command. See
route-map <map-name> [ permit | deny ] <sequence number>
on page 490 for more information.
Usage Examples
The following example specifies a route-map entitled myMap for local policy routing:
ProCurve(config)#ip local policy route-map myMap
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
422