HP ProCurve 7102dl Reference Manual page 97

SROS Command Line Interface Reference Guide
debug firewall alg sip [verbose]
Use the debug firewall alg sip command to activate debug messages associated with Session Initiation
Protocol (SIP) information with SROS firewall operation. Debug messages are displayed
(real-time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug
messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with SIP information with SROS firewall
operation:
ProCurve>enable
ProCurve#debug firewall alg sip
5991-2114
Enables detailed debug messages.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
95