HP ProCurve 7102dl Reference Manual page 108

SROS Command Line Interface Reference Guide
debug ip ftp-server
Use the debug ip ftp-server command to activate debug messages associated with File Transfer Protocol
(FTP) server events in the SROS device. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug ip ftp-server command activates debug messages to provide information on FTP server
activity in the SROS. The FTP server capability allows for fast file management and transport for local or
remote devices.
Usage Examples
The following example activates debug messages associated with FTP server activity:
ProCurve>enable
ProCurve#debug ip ftp-server
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
106