HP ProCurve 7102dl Reference Manual page 281

SROS Command Line Interface Reference Guide Enable Mode Command Set
show startup-config checksum
Use the show startup-config checksum command to display the MD5 checksum of the unit's startup
configuration.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Functional Notes
This command is used in conjunction with the show running-config checksum command to determine
whether the configuration has changed since the last time it was saved.
Usage Examples
The following example displays the MD5 checksum of the unit's startup configuration:
ProCurve#show startup-config checksum
10404D5DAB3FE35E307B6A79AC6AC8C0
ProCurve#
ProCurve#show running-config checksum
10404D5DAB3FE35E307B6A79AC6AC8C0
ProCurve#
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 279