HP ProCurve 7102dl Reference Manual page 502

SROS Command Line Interface Reference Guide
snmp-server chassis-id <id string>
Use the snmp-server chassis-id command to specify an identifier for the Simple Network Management
Protocol (SNMP) server. Use the no form of this command to return to the default value.
Syntax Description
<id string>
Default Values
<id string>
Usage Examples
The following example configures a chassis ID of A432692:
ProCurve(config)#snmp-server chassis-id A432692
5991-2114
Identifies the product by alphanumeric string (up to 32 characters in length).
Chassis ID
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
500