HP ProCurve 7102dl Reference Manual page 262

SROS Command Line Interface Reference Guide
The following example shows a particular QoS map entry (in this case map entry 10):
ProCurve#show qos map priority 10
qos map priority
map entry 10
match IP packets with a precedence value of 6
priority bandwidth: 400 (kilobits/sec) burst: default
packets matched by map: 125520
The following examples show QoS map interface stats associated with the map defined for an interface:
ProCurve#show qos map interface frame-relay 1
fr 1
qos-policy out: priority
map entry 10
match IP packets with a precedence value of 6
budget 145/10000 bytes (current/max)
priority bandwidth: 400 (kilobits/sec)
packets matched on interface: 27289
packets dropped: 98231
map entry 20
not configured for rate limiting
map entry 30
not configured for rate limiting
map entry 50
not configured for rate limiting
map entry 60
not configured for rate limiting
map entry 70
match NetBEUI frames being bridged by the router
budget 3750/3750 bytes (current/max)
priority bandwidth: 150 (kilobits/sec)
packets matched on interface: 0
packets dropped: 0
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
260