HP ProCurve 7102dl Reference Manual page 150

SROS Command Line Interface Reference Guide
dir [cflash | flash] [ * ]
Use the dir command to display a directory list of all files on the system in flash memory or on the
installed compact flash card or all files on the system in flash memory or on the installed compact flash
card matching the specified pattern.
Syntax Description
cflash
flash
*
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output from the dir command specifying a list of all .biz files found on the installed
compact flash card:
ProCurve>enable
ProCurve#dir cflash *.biz
4206603 HP7203A-08-00-23b-HP1-E.biz
284007 HP7203B-boot-08-01-01-HP.biz
4234845 HP7203A-08-01-01-HP-E.biz
284238 HP7203B-boot-08-01-02-HPatp.biz
4038590 HP7203A-08-01-02-HPatp-E.biz
285416 J01_01_02-boot.biz
4039977 J01_01_02.biz
4043024 J01_01_03.biz
2649600 ericcode.biz
24208408 bytes used, 4915176 available, 29123584 total
5991-2114
Specifies files located on the installed compact flash card.
Specifies files located on the system in flash memory.
Optional. When a wildcard is specified, only files located in the specified location
matching the listed pattern are displayed.
When no wildcard is specified, the entire contents of flash memory is displayed.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
148