HP ProCurve 7102dl Reference Manual page 824

SROS Command Line Interface Reference Guide
caller-number <CLID number>
Use the caller-number command to link calls to specific interfaces based on its caller ID (CLID) number.
Multiple caller ID numbers may be specified, allowing the interface to accept calls from different remote
resources. Use the no form of this command to remove a configured caller number.
Syntax Description
<CLID number>
Default Values
By default, no caller numbers are defined.
Usage Examples
The following example links calls with a CLID number of 9165551212 to the demand interface 1:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#caller-number 9165551212
5991-2114
Identifies the caller's number to be linked to an interface. The CLID number is
limited to 20 digits.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
822