HP ProCurve 7102dl Reference Manual page 897

SROS Command Line Interface Reference Guide
qos-policy out <mapname>
Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no
form of this command to remove the map from the interface. The out keyword specifies that this policy
will be applied to outgoing packets.
Syntax Description
<map name>
Default Values
No default value is necessary for this command.
Usage Examples
The following example applies the QoS map VOICEMAP to the Frame Relay 1 interface:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#qos-policy out VOICEMAP
5991-2114
Specifies the name of a previously-created QoS map (see
<mapname><sequence number>
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Interface Config Command Set
on page 486 for more information).
qos map
895