SROS Command Line Interface Reference Guide
debug ip dns-proxy
Use the debug ip dns-proxy command to activate debug messages associated with DNS (domain naming
system) proxy operation in the SROS. Debug messages are displayed (real-time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug ip dns-proxy command activates debug messages to provide information on DNS proxy
activity in the SROS. The IP DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS proxy activity:
ProCurve>enable
ProCurve#debug ip dns-proxy
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
104