HP ProCurve 7102dl Reference Manual page 478

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
logging forwarding on
Use the logging forwarding on command to enable the SROS syslog event feature. Use the logging
forwarding priority-level command to specify the event matching the criteria used by the SROS to
determine whether a message should be forwarded to the syslog server. See logging forwarding
priority-level [error | fatal | info | notice | warning] on page 477 for related information. Use the no form
of this command to disable the syslog event feature.
Syntax Description
No subcommands.
Default Values
By default, syslog event notification is disabled.
Usage Examples
The following example enables the SROS syslog event feature:
ProCurve(config)#logging forwarding on
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 476