SROS Command Line Interface Reference Guide
spanning-tree hello-time <seconds>
Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello
bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.
Syntax Description
<seconds>
Default Values
<seconds>
Usage Examples
The following example configures a spanning-tree hello-time interval of 10000 seconds:
ProCurve(config)#spanning-tree hello-time 10000
5991-2114
Delay interval (in seconds) between hello BPDUs. Range: 0 to 1,000,000.'
2 seconds
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
524