HP ProCurve 7102dl Reference Manual page 140

SROS Command Line Interface Reference Guide
debug sip [location | manager | name-service | proxy <subsource>]
Use the debug sip command to activate debug messages associated with Session Initiation Protocol (SIP)
events. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.Variations of this command include:
debug sip location
debug sip manager
debug sip name-service
debug sip proxy <subsource>
debug sip trunk-registration
debug sip trunk-registration <Txx>
debug sip trunk-registration <Txx> <identity>
debug sip user-registration
debug sip user-registration <extension>
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
location
manager
name-service
proxy <subsource>
trunk-registration <Txx> <identity>
user-registration <extension>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates all debug messages associated with SIP CLDU events:
ProCurve>enable
ProCurve#debug sip
5991-2114
Activates SIP location database event debug messages.
Activates SIP stack manager event debug messages.
Activates SIP name-service event debug messages.
Activates SIP proxy event debug messages. Input for specifying a
subsource is optional.
Activates SIP trunk-registration event debug messages. Specifying
a particular trunk is optional. For example: Txx (T01) where xx is
the trunk's two-digit identifier and <identity> is the specific name
associated with the trunk.
Activates SIP user-registration event debug messages. Specifying
a particular trunk is optional.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
138