HP ProCurve 7102dl Reference Manual page 814

SROS Command Line Interface Reference Guide
mac-address <mac address>
Use the mac-address command to specify the Media Access Control (MAC) address of the VLAN
interface. Only the last three values of the MAC address can be modified. Use the no form of this
command to return to the default MAC address programmed by ProCurve.
Syntax Description
<mac address>
Default Values
A unique default MAC address is programmed in each unit shipped by ProCurve.
Usage Examples
The following example configures a MAC address of 00:0A:C8:5F:00:D2 for BVI interface 1:
ProCurve(config)#interface bvi 1
ProCurve(config-bvi 1)#mac-address 00:0A:C8:5F:00:D2
5991-2114
Specifies a valid 48-bit MAC address. MAC addresses should be expressed in
following format xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BVI Interface Config Command Set
812