HP ProCurve 7102dl Reference Manual page 450

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
ip sntp server
Use the ip sntp server command to enable the simple network time protocol (SNTP) server. This allows
the unit to accept SNTP requests. Use the no form of this command to disable the server.
Syntax Description
No subcommands.
Default Values
By default, the SNTP server is disabled.
Usage Examples
The following example enables the SNTP server:
ProCurve(config)#ip sntp server
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 448