HP ProCurve 7102dl Reference Manual page 292

SROS Command Line Interface Reference Guide
show version
Use the show version command to display the current SROS version information.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample show version output:
ProCurve>enable
ProCurve#show version
ProCurve Secure Router 7203dl
SROS Version: J04.01
Checksum: 74305239, built on: Fri Dec 09 10:00:32 2005
Boot ROM version J04.01
Checksum: 4353, built on: Fri Dec 09 10:00:35 2005
Copyright (c) 2005-2005, Hewlett-Packard, Co.
Platform: ProCurve Secure Router 7203dl
Serial number US449TS040
Flash: 33554432 bytes DRAM: 268435455 bytes
System uptime is 0 days, 6 hours, 55 minutes, 24 seconds
Current system image file:
Current configuration-file:
Configured system image path:
Primary:
Backup:
Configured configuration-file path:
Primary:
Backup:
ProCurve#
5991-2114
"CFLASH:/SROS.BIZ
CFLASH:/startup-config"
"CFLASH:/SROS.BIZ"
"NONVOL:/SROS.BIZ"
"CFLASH:/startup-config"
"NONVOL:/startup-config"
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
290